| 
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • Files spread between Dropbox, Google Drive, Gmail, Slack, and more? Dokkio, a new product from the PBworks team, integrates and organizes them for you. Try it for free today.

View
 

JeeLabs Memory Plug - 256K Byte

Page history last edited by Nick 9 years, 8 months ago

 

The Memory Plug is a small board with space for 4 STMicroelectronics M24M01 EEPROM memory chips. Total possible storage is 512 Kbyte of memory (4x 1 Mbit). This board has two of the four chips soldered on (256K). Let us know if you would like to see a 512K version of the board with all four slots populated.

 

This board turns the JeeNode into a nice compact stand alone datalogger for medium to small data-logging applications. For example, a mobile JeeNode, on a horse, rocket, boat, bike or jogger might store data until it was in range of a partner JeeNode, JeeLink or JeeUSB, then dump the data to a larger computer.

 

An I2C bus running at 3.3V is used as interconnect, with all the power and signal lines brought out to to both sides of the board to allow daisy-chaining with other I2C-conformant boards.

 

The pre-assembled version comes with two SMD-sized M24M01 flash memory chips (i.e. 128 Kbyte) populated and the decoupling capacitor already soldered onto the board. The PCB version can be populated by the user with from 1 to 4 chips (128, 256, 384 or 512 Kbytes).

 

The preassembled version ships with one six-pin right angle male header.
The PCB only variant contains just the board for the Memory Plug. No parts, no headers.

 

Package Contents
Assembled JeeLabs LCD Plug board
1 6 pin male right angle header

 

OR

 

1 JeeLabs Memory Plug PCB

 

Resources
m24m01 EEPROM datasheet
JeeLabs Memory Plug Page

Comments (0)

You don't have permission to comment on this page.