The Blink Plug is a small board with room for two LEDs and two push buttons. This kit is packed with 3 mm LED’s so they look a bit smaller than the picture. The Blink Plug is useful for adding user interface elements to a JeeNode application. It could be just as easily used on a BBB or other microcontroller.
The PCB-only variant has the printed circuit board. No parts, no headers. There is no pre-assembled version.
Package Contents
1 green 3mm LED
1 red 3mm LED
2 470 ohm resistors
2 6 mm momentary switches
1 right-angle 1×6 male header
1 JeeLabs Blink Plug pcb
