| 
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • You already know Dokkio is an AI-powered assistant to organize & manage your digital files & messages. Very soon, Dokkio will support Outlook as well as One Drive. Check it out today!

View
 

JeeProto Boards

Page history last edited by Nick 13 years, 10 months ago

 

The Proto Bord is a small add-on board which fits over all the connectors of a JeeNode (except the FTDI connector).

 

The two “ends” of the board are slightly different to help identify the proper orientation of the board when placing it on a JeeNode.

 

All the pads on the board are unconnected and all the holes are plated-through so they can be used from either side of the board.

 

The pins of all the port headers are labeled on both sides of the board. The SPI/ISP and PWR/I2C connectors can be tied to the JeeNode if needed, via their own headers at both ends of the board.

 

Note that no headers are included, this is a PCB only.

 

As connectors you can use a Plug Headers set with 10 male and 10 female 6-pin headers, which makes it easy to connect multiple plugs and JeeNodes in a “standard” way. Or you can solder the board directly in place for more permanent use.

 

Resources

 

Comments (0)

You don't have permission to comment on this page.