• If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • Files spread between Dropbox, Google Drive, Gmail, Slack, and more? Dokkio, a new product from the PBworks team, integrates and organizes them for you. Try it for free today.


JeeProto Boards

Page history last edited by Nick 9 years, 8 months ago


The Proto Bord is a small add-on board which fits over all the connectors of a JeeNode (except the FTDI connector).


The two “ends” of the board are slightly different to help identify the proper orientation of the board when placing it on a JeeNode.


All the pads on the board are unconnected and all the holes are plated-through so they can be used from either side of the board.


The pins of all the port headers are labeled on both sides of the board. The SPI/ISP and PWR/I2C connectors can be tied to the JeeNode if needed, via their own headers at both ends of the board.


Note that no headers are included, this is a PCB only.


As connectors you can use a Plug Headers set with 10 male and 10 female 6-pin headers, which makes it easy to connect multiple plugs and JeeNodes in a “standard” way. Or you can solder the board directly in place for more permanent use.




Comments (0)

You don't have permission to comment on this page.